Discuss operator-led bobcat work for loading, spreading, grading and clearing.
Compact, powerful and versatile, a bobcat is often the right tool for the job, and Sutherland Shire Bobcat Hire brings an experienced operator and well-maintained machine to your site. We handle digging, levelling, loading and clearing.
Tell us the tasks, site access and timeframe. Whether it is a half day of levelling or a larger clean-up, the right attachments and a skilled operator keep your project efficient and cost-effective.
From Miranda, Caringbah and Gymea to Kirrawee, Jannali and Cronulla, bobcats suit tight yards and busy residential streets. Reliable service and tidy work leave your site clean and ready to use.
Explore the scope ↓Our experienced operators bring well-maintained bobcats to your site, handling digging, levelling, loading and clearing efficiently without you needing to organise licences or equipment, keeping your project simple and stress-free. Hire can be booked by the hour or full day.
Buckets, augers and grapples allow the bobcat to handle a wide range of jobs, from landscaping preparation to site clean-ups and material handling, all with one machine and one operator. Attachments are changed over on site as each task requires.
A compact footprint makes bobcats perfect for backyards, side passages and busy streets, where larger wheel loaders cannot easily fit or turn around, delivering strong results while protecting your property and neighbouring areas, with minimal disruption to your daily routine.
Skid-steer loaders (the Bobcat brand name is often used for the whole category) are the workhorses of tidy-up and material-handling jobs.
Scoops spoil, sand, mulch or demolition debris straight into a skip or tipper. Handy where an excavator would be overkill. Confirm the bucket size, the skip or truck weight limit and where the vehicle can safely stand while loading material.
Pushes out topsoil, road base or sand to rough levels before a final trim by hand or a grader blade. Agree the target levels and falls first, and keep material well away from house walls, doorways and brickwork weep holes.
Moves green waste, small stumps and loose rubble. Check what the machine and attachment are actually suited to. Larger stumps, protected trees and anything near the boundary may need an arborist, a mini excavator or Council advice before work starts.
Augers, pallet forks, trenchers and grapples can fit some machines. Ask which attachments are available for your job. Each attachment changes what the machine can safely carry, so confirm that the operator is experienced with the particular tool being used.
Pushes material back over trenches or behind retaining walls once drainage and inspections are done. Backfill is usually placed and compacted in thin layers, and heavy machines kept back from new walls so they are not pushed over or cracked.
Scrapes topsoil and boxes out shallow areas for driveways, paths and paver bases to the depth the builder specifies. Deeper or rocky digs suit an excavator better, and the base is usually compacted with a plate or roller once trimmed.
Measure the narrowest gate, any steps or slopes, and the route the machine will take. Tell the contractor so the right size machine arrives. Photos of the side passage, driveway and any tight turns help them confirm the fit beforehand.
Mark services, tree roots, pavers and drains. Ground protection or sheeting reduces damage from tracks or tyres. Point out septic lines, pool plumbing and irrigation to the operator on arrival, because these private services rarely appear on any utility plans.
Load, spread or clear in the order that keeps the machine off finished surfaces and works downhill where possible. Keeping each material type in its own pile as you go also makes loading trucks and sorting tip loads much simpler.
Stop and check against pegs, string lines or the builder's levels before you have moved everything. Small errors across a whole yard add up quickly, and correcting levels after compaction usually means digging the material out and redoing the work.
Sweep or scrape the street frontage and shared areas. Mud and sand on the road can wash into stormwater. Check the kerb, footpath and neighbouring driveways too, and photograph them before the machine arrives and after it leaves the site.
Both are compact, but they solve different problems.
Many jobs need both: dig with the mini excavator, then load and spread with the skid-steer. Describe the job and ask the contractor what they recommend.
A gate that looks wide enough can lose clearance to a latch, a meter box or an overhanging branch. Measure at the narrowest point. Check the height under eaves and pergolas too, and any tight turns along the side path.
Skid-steer turning scuffs soft ground and cracks thin pavers. Plan travel routes and ask about boards or sheeting. Wet weather makes this much worse, so consider rescheduling if the lawn is saturated rather than repairing deep ruts and scuffs afterwards.
Moving material to the wrong height means moving it twice. Set pegs or string lines before the first load goes down. Confirm finished levels with the builder or landscaper, allowing for the depth of turf, paving bedding, mulch or topsoil.
Mixing soil, rubble and green waste raises tip costs and cuts recycling options. Separate piles as you go. A mixed load may be refused or charged as general waste, and clean fill becomes much harder to reuse on another site.
A bobcat is only as good as the operator behind it, and our hire service gives you both. We supply a well-maintained machine with an experienced operator, so you do not need to worry about licences, insurance or setup. Our team handles digging, levelling, loading and clean-ups efficiently, using attachments to suit the task. Clear communication means you know the timing, rates and scope before we arrive. With local knowledge of Sutherland Shire backyards and busy residential streets, we work cleanly and safely in tight spaces, protect your property and deliver reliable, cost-effective, tidy results that keep your project moving.
Talk to our team ↗ Access width, material type and the required attachment.
Ask us about your project ↗Bobcat is a brand of skid-steer loader, but the name is commonly used for any compact loader of that type. When booking, describe the job and ask what machine is actually being supplied.
Often, but it depends on the machine. Measure the narrowest point including latches, meter boxes and overhanging branches, and give that figure to the contractor.
It can. Tyres or tracks turning on soft ground leave marks, and heavy machines can crack thin pavers or old driveways. Ask about ground protection and the route the machine will take.
Depending on the machine and attachments, loading skips, shifting pallets, grading gravel and some drilling or light trenching. Ask the contractor to confirm what suits your job.
Share the address, the access and the result you need.
Details first. Then a plan that suits the site.